The most commonly installed product in the BlueTex™ lineup. For most customers and most applications, the 2mm Pro is exactly what the building needs. Foil on one side, bright white woven finish on the other - blocks 97% of radiant heat and acts as an effective vapor barrier when installed airtight.

Best for: Garages, workshops, pole barns, storage buildings, airplane hangars, and any metal building where heating or cooling is occasional. For buildings on 48" on-center framing.

Same EPE foam core and 97% radiant heat reflection as the 50" Pro - wider format for buildings with 60" on-center framing. One roll spans the full bay with room for overlap, eliminating the need for seam alignment adjustments. Same climate applications as the 50" Pro.

Best for: Garages, pole barns, metal buildings with 60" on-center framing. Same performance as the 50" Pro, different framing fit.

The 6mm Supreme uses a denser XPE foam core - designed for cold and wet climates, or any building where consistent heating is a regular goal. The extra foam thickness provides better vapor resistance and more insulation against heat loss in winter. Includes an adhesive edge on one side for EZ-seal overlapping seams.

Best for: Cold-climate metal buildings, buildings with regular heating loads, maximum condensation control. For buildings on 48" on-center framing.

Important: Do not use on roll-up garage doors - the thickness will interfere with the rolling mechanism. Use the 2mm Pro 50" for all roll-up door applications.

Same denser XPE foam core as the 50" Supreme - wider format for buildings with 60" on-center framing. All the same cold-climate and maximum condensation control performance, sized to span 5' bays cleanly. Includes adhesive seam edge.

Best for: Cold-climate buildings and maximum moisture control applications on 60" on-center framing.

If you are creating a continuously climate-controlled space - a barndominium, an office conversion, a living area inside a metal structure - Thermal Wrap is designed to pair with R-value insulation for maximum performance. Radiant barrier alone is not the right solution for a building that runs HVAC continuously.

Thermal Wrap gives you the vapor barrier, air barrier, and radiant heat reflection in one product. Always pair with a mass insulation product (spray foam, fiberglass batts, or rigid foam board) to handle conductive heat transfer in a fully sealed envelope.

Best for: Barndominiums, fully conditioned shops, office conversions inside metal buildings. Contact us for guidance on what R-value product to pair it with for your specific application.

Reflects 97% of radiant heat from the foil side - with a white finish on the opposite side for a cleaner interior look. The foil side must face an air space of at least 1/2" to function. Micro-perforated with tiny pinholes every 1/2" - this is a breathable product, not a vapor barrier. For heat control only, not moisture management.

Best for: Hot climates, vented attic spaces, and applications where heat control is the goal and moisture is not a concern. Available in 48" wide and 60" wide rolls.

Foil on both sides - reflects 97% of radiant heat regardless of which face is oriented toward the heat source. Heavyweight at 28.6 lbs per 1,000 sq ft. Tear-proof construction holds up to stapling without ripping. Rolls are approximately 6" in diameter for easy handling. Micro-perforated - not a vapor barrier.

Best for: Hot climates, vented structures where orientation during install is a concern or where foil on both sides is preferred. Available in 48" wide and 60" wide - also available in bulk crates (85 rolls / 42,500 sq ft) for large commercial projects.